作物生长的土壤中氧气浓度场的稳态数值模拟

建立了一个描述土壤中热、湿、气耦合迁移的数学模型,对有冬小麦生长的圆柱形土壤床中的氧气浓度场进行 了数值模拟。结果表明,土壤床中的氧气浓度场与冬小麦的生长发育阶段、上壤的孔隙率以及土壤床的高度等因素密切相 关。     

Simulation of polarization effects in AlGaN/GaN heterojunction

Because of their large band-gap, large high-field electron velocity, large breakdownfield, and large thermal conductivity, GaN and its heterojunction with AlGaN and InGaNhave foreseeable potential in the applications of high-power/temperature electronics, andoptoelectronic devices operative in UV and visible wavelength. Polarization inducedelectric field can reach the magnitude of ~MV/cm[1,2]. For AlGaN/GaN based FETs theconcentration of sheet carrier induced by polarization in the cha…     

直流电弧等离子体炬的特性研究

介绍了局部热力学平衡下描述直流电弧等离子体炬的磁流体力学模型，采用数值模拟方法研 究了等离子体炬内等离子体的传热和流动特性、湍流对等离子体炬内等离子体特性的影响， 以及等离子体炬运行参数对等离子体特性的影响.将数值模拟结果与已有的实验结果进行了 比较. 关键词： 等离子体炬 磁流体力学 数值模拟     

微扰影响下组合孤波的传输稳定性研究

针对最近发现的高阶非线性薛定锷方程的组合孤波解，我们数值研究了它在受到包括幅度偏离、参数条件偏离以及随机噪声等不同初始扰动后的传输特性。结果表明一定的精确脉冲在不同的扰动下有类似的稳定趋势。     

Plastic multipliers as driving variables of numerical simulation in elastoplasticity

Statics of elasto-plastic media is stated in terms of eigenstrains acting upon a background elastic problem with fixed (initial) stiffness. In order to minimize the number of unknowns and to provide computationally cheap algorithms plastic multipliers are used as main driving variables. Fixed-point type iterations are suggested for computing plastic multipliers within the load increment. Numerical experiments results are shown to be in good correlation with other software results. A range of problems is outlined where the usage of the proposed algorithms can be advantageous.     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.     

不同倾角的脉管制冷机内自然对流影响的研究

本文通过对脉管内自然对流的数值模拟，讨论了当脉管冷端处在不同方向时，脉管内的自然对流对脉管制冷机性能的影响．数值模拟结果表明，当冷端在下时获得的制冷温度最低；当热端在下并与重力方向成３０°时制冷温度最高．结论与实验测量结果定性一致．所做的理论分析对实现脉管制冷机的良好运行有指导意义。     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

BNCT蒙特卡洛剂量计算的混合网格算法研究

在硼中子俘获治疗(BNCT)的蒙特卡洛(MC)剂量计算中,通常使用单一的网格模式,如16mm,8mm,4mm.使用细网格计算资源太大,使用粗网格,计算精度不够,为此,根据粒子穿透深度和计数量的变化梯度,采用混合网格模拟计算,达到了细网格的精度,时间仅为细网格的37%.     

双组元姿控发动机反流特性的DSMC模拟

为准确获得双组元姿控发动机的羽流及其反流特性,采用直接模拟蒙特卡罗(DSMC)方法结合可变软球(VSS)模型数值模拟以N2O4/MMH为推进剂的真空羽流。喷口参数由喷管流动的DSMC法计算得到。与文献比较表明本文计算程序可信。模拟结果表明,分子质量越小的气体越容易进入反流区;本文的计算条件下,在偏离X轴正向116°~140°范围内,组分数密度和质量流率以及温度均出现了最大值。